Hi there, friends! I’m
finally going to share how we made my son’s “Bigger Boy” bedroom headboard. Bigger boy meaning that he’s
not a tween but he’s also not a little guy moving out of his crib into a
traditional “big boy” room. This is one
of my most favorite pieces that we’ve ever made. It turned out exactly how I wanted, which
doesn’t always happen in the world of DIY.
I found some pics of beds I liked and then Mr. Chic and I came up with a plan to make a pallet-inspired headboard. I’m sure you’ve seen all kinds of pallet wood projects all
over blogland. I like the industrial, rustic
and weathered look of pallet wood and I especially like the price. (FREE!)
But, I was worried about what was in that free wood. Some are chemically treated and some aren’t. But if I find one that isn’t chemically
treated how can I confirm what it has been used for? I can’t?
Ok, then forget it. My kiddo has
allergies and I’m not going to stick his head next to a suspect pieces of wood
that could’ve been carrying bags of fertilizer or cow manure. Ok, I
might be exaggerating but I ddn’t want to take any chances with my boy. If you want to use pallet wood just make sure you do your homework first.
We splurged on new wood:
·
2 untreated 4x4 posts
·
1 untreated 2x4 top support
· 10 untreated 1x6 face boards
·
1½” finish nails
·
4 4” bolt, lock washers, washer, nuts (to attach
headboard to bed frame)
·
If including a light fixture
Tools I used:
·
Mitre saw
·
Hammer
·
Tape measure
·
Electric sander
·
Glue
·
Speed square (important!)
·
If including a light:
o
Extension cord
o
Wire strippers / cutters
To start we built an upside down U that would give us the
legs and a frame to nail the face boards to. For some reason we didn't get a pic of this but you can see the U shape in the pic below.
I wanted the headboard to be tall and bold,
so we cut the 4x4 at about 60 inches.
We cut the 2x4 top support to be as long as a twin bed is
wide, 40 inches. That make sense?
Then we cut the 1x6 face boards so that about 3” of each 1x6
extends beyond each 4x4 post. You can see how the face boards stick out past the posts in the pic below.
We sanded it all and followed with a mix of stains we’d used
on other projects and really like. It’s quick and gives the wood a nice and rustic color.
First, we apply Minwax wood stain in Ebony, then quickly
wipe it off.
The same board gets
Rustoleum wood stain in Sunbleached, and then quickly wiped off. This coat creates
a grayish undertone making the darker stains appear less harsh.
The final coat is Minwax wood stain English Chestnut, wipe it off and let it dry.
Working on the floor so it didn’t move a lot, we attached
the 2x4 top support to each 4x4 post. We
used some blobs of glue, then drilled three pilot holes through the 2x4 and
into the top of the 4x4 to prevent splitting. (We did this after we stained it but we had laid them all out first to see how they fit)
This gave us the upside down U the width of the twin bed.
Being square isn’t critical at this point and it will be flimsy.
The next steps are where it’s hip to be square. (Those of
you old enough to know Huey Lewis, I’m sorry – that song’s stuck in my head now
too. It reminds me of grade school and dancing in my friends basement to the
radio wearing fluorescent clothing and jelly bracelets.Those of you too young to know Huey Lewis can Google it!).
Starting at the top of the upside down U, we ran a bead of
glue along the 2x4. Using my speed square, I put finish nails in the first 1x6
face board, making sure there were three inches of face board extending beyond each
post. I used the speed square to make sure it was square to EACH of the 4x4
posts.
that there is a speed square :)
Then, I glued and nailed the rest of the face
boards to the frame using the speed square to attach each face board to each
post.
It might seem like since we squared up the first board, we
can just butt each new face board to that one and be square all the way down.
But remember, the leg posts aren’t square on the upside down
U – so don’t forget it, or you’ll regret it.
Next, we let it air out for a couple days to let the stain
smell go away. Then, we drilled through the 4x4 posts and attached the
headboard to the bedframe with the nuts, washers and bolts.
Ours isn’t attached to the wall, but it’s heavy, so if your
kids (or you) like to jump on the bed, you might want to use some L brackets to
attach to the studs.
Here’s how we did the light and here is the link to a similar galvanized light fixture:
Ours is an outdoor light meant to connect to an outdoor
electrical box – so it didn’t have a way to be plugged in or anything to attach
it indoors.
Here’s how we solved that:
I bought a lamp cord – which is a cord with a plug
on one end, and bare wires on the other.
I connected the cord to the light using wire nuts and
wrapping the connections with electrical tape.
I drilled through the top of the headboard, and since there
was no way to connect the light to the headboard (it’s designed to connect to
an electrical box), I drilled a hole in the middle of a scrap piece of 1x4 and
attached it to the back of the headboard with a couple of screws.
It looks janky, but who’s gonna see it, right?
Then, I drilled a hole at the bottom of the headboard for
the cord to run back through the front – where little chic could easily turn
the light on and off when he wanted. (As you can see it got scraped up a little bit but this part is hidden by the mattress so I haven't gotten around to touching it up yet.)
I attached an in-line light switch following instructions on
the Family
Handyman website.
And that was it. We got a simple, industrial, non-chemically
treated headboard that our son can use to read by before he goes to bed each
night. Let us know if you build something similar!
Test comment... my comments disappeared today. :(
ReplyDeleteGreat project and it really doesn't look too complicated! Awesome job and looks great!
ReplyDeleteLooks great, I know your son is enjoying his new digs. ginger
ReplyDeleteI love how this turned out! It looks great with the yellow and grey bedding!
ReplyDeleteI love your headboard, the light is awesome too!
ReplyDeleteLove this and how smart adding that light.
ReplyDeleteI love this! Adding the light was brilliant! Great tutorial!
ReplyDeleteAmanda @Cultivate Create
Hi! Do you stain all three colors at the same time, or let the first layers dry completely? Thank you!
ReplyDeleteWhat kind of wood did you use for this amazing boys' bed? I am looking into getting an entire bedroom set (bed, nightstands, dresser, chest) made with this wood, stain, and look. This room is so cute!
ReplyDeleteWhat kind of wood did you use for this boys' bed? I am looking into getting an entire bedroom set (bed, nightstands, dresser, chest) made with this look and would like to use a wood grain that would achieve this exact look with this stain. Thanks! This bedroom is so cute!
ReplyDeleteI'm doing something similar but cheating usuing an Ikea Fjellse bed, and adding pine 2x4's for the headboard. Saves alot of time on putting the frame together for non-wood working peeps like me :)
ReplyDeleteDo you stain all three colors at the same time, or let the first layers dry completely? Thank you!
ReplyDelete