Chic on a Shoestring Decorating: How to Make a Camera Strap Cover, guest post by Living Rich on Less

This blog contains affiliate links. If you click one and make a purchase, I may make a commission at no additional cost to you. Read more here.

How to Make a Camera Strap Cover, guest post by Living Rich on Less

Hello! I'm Susan and I blog about decorating, organizing and home and life improvement at Living Rich on Less. I am honored to have the opportunity to guest post for Kate today. I love Kate's simple, uncluttered style of decorating and her knack for creating great color combinations.

As we bloggers know, good photography is a key component of a professional and captivating blog space. For my photos, I shoot with a Nikon D2X digital SLR camera, which I purchased used on eBay. I use a Tamron 18-200 mm lens for my "everyday"  photos; and I use a Tamron 10-24 mm lens when I need those wide, full-room shots (like my living room and guest bath re-do). I would also recommend purchasing a 50 mm fixed focus length lens, which works fabulously in low-light situations for portraits and detailed photos, like food.With all that said, a good camera deserves a super-cute, customized strap cover to go along with it, wouldn't you agree?You can find gorgeous, handmade camera strap covers all over Etsy-land. But they can cost as much as $50. Today I'm going to show you how to make your very own, on the cheap!

You'll want to begin by checking the dimensions of your camera strap. Add two inches to both the length and width and cut out two identical pieces of fabric matching those dimensions. (I cut mine 26 inches long by
4 inches wide)

Next you'll want to cut out some fleece fabric, which will serve as a liner (this makes for a nice, thick, comfy strap cover).To determine the size of your fleece strips, subtract one inch from the length and width of your fabric pieces. (My fleece strips were 25 inches long by 3 inches wide.) This will keep your hem from getting too puffy-looking.Now you'll want to sew a 1/2-inch hem along the top and bottom of each strip.Once you have all four tops and bottoms hemmed, it's time to line up the whole piece and begin making the final hems.Flip both pieces over so the felt is on the inside and begin folding under the sides (1/2 inch) and then pinning the two pieces together.Once you have everything pinned, carefully hem each side. Caution: Make sure you don't hem in too far; you'll need to leave ample room for the strap to slip through.Once you're done with the strap cover, you can embellish it with a handmade rosette, like I did.I just used my hot glue gun and some 1 1/2-inch ribbon to create this rosette.After that, just slip your strap through the cover and voila! Here's the finished product.The total cost of this project was $8, including the fabric, fleece lining and green ribbon. Not too bad, huh? Total time spent on the project was two hours.
For more budget-friendly craft, home decorating and organizing tips, visit me at Living Rich on Less. To keep up with my latest posts, "Like" Living Rich on Less on Facebook, follow @Livinrichonless on Twitter, or subscribe for free using the subscribe box on the ride sidebar of my home page.


  1. This is so cute! I have GOT to get a better camera. Most of my pictures I just take with my iPhone and it SHOWS. Going over to check out your blog now! Great guest post Kate!

  2. Cool! I just purchased a Nikon S-L-R. Maybe I'll make myself a lovely strap cover - after I finish making my daughter's prom formal.

  3. This is one of the more memorable posts I have read on this topic - in large part due to the writing style displayed here. Inasmuch as I appreciate reading informative posts, I appreciate

    Camera Accessories Online


I L-O-V-E love your comments! :) I read and try to respond to every one! Thanks for taking your precious time to leave me a comment.

My faves...

09 10 ""